Four Best Survival Knives for Beginners

Are you an outdoor type of person who goes out in the wilderness every once in awhile? If so, there is one little item that you have to have in your pocket, and that is a survival knife. A survival knife is very important because it has plenty of use in the wilderness. Among other uses, you can use it to skin animal or protect you from danger. For a beginner survivalist, choosing the right knife can be a rather daunting task. Luckily, we have four amazing knives that we can recommend for beginners. Here are four of the best survival knives that should be in your survival bag.

The SOG Force

SOG Force - best survival knifeSOG is known as a very popular brand for survival knives, so it is only fitting that we start the list with this one. SOG Force is the ultimate survival knife for everybody, especially for beginners. It has a serrated edge and also and a blade. The serrated edge is a good use of sewing woods and the likes. And the blade is strong enough to cut almost anything. The best thing about this knife is its ability to endure bad weather, especially wet weather. The length is just right with a six inches size that can fit into your pocket.

The Beautiful Tom Brown Tracker

This one is a jack of all trade in the survival knife sector. The best quality about this knife is the blade itself which is as sharp as a shark’s teeth. The blade can be used to skin little animals that you catch in the jungle. The carbon material also makes it durable and weather-proof. The size of the blade itself is rather short compared to others in the market. But it has a long grip which is rather comfortable to hold.

Afghan Knife Gurkha Kukri

If you are not a big fan of a small survival knife, Gurkha Kukri might be the option for you. This one is a mix between a regular survival knife and also a machete. The form itself resembles more of a machete, but it is certainly smaller. Despite so, it is still quite big as it is a sixteen inches of the knife. For those who have to survive in a harsher wilderness, bringing this might be an advantage. This knife is made to cut and definitely possess an extra show when brought to the jungle.

Green Beret Knife from Chris Reeve

Chris Reeve always provides a set of unique knives in their collection. The Green Beret knife is a standard seven inches survival knife with plenty of uses. Initially, this knife is designed for combat thus, it is rather heavy. Despite so it is a very good knife for survivalist as it provides all the best function such as skinning and woodworking. It comes with a serrated section and the main blade. With carbon material, the knife will definitely last a long time as long as you take good care of it. This could be the best choice for a first time survivalist.

Best Fillet Knife Duel – Mora vs Rapala

After years of processing fish using a classic knife, I decided to test the filleting knife. The choice fell on two competing brands namely the Swedish classic Mora and Rapala. I had the opportunity to try and choose one that will best serve my needs.

Both knives are a dimensionally and visually very similar. The total length of the two is 27.5 cm and a blade length is 15 centimeters. The Rapala knife is made in China, but the quality of workmanship is one hundred percent. Mora is manufactured in Sweden. Blade material of both knives is stainless steel, which does not tend to corrode and holds very good edge. What can a man be pleased with is that Rapala bundled a simple knife sharpener with the knife.


Mora - best fillet knife from SwedenRegarding sheaths, the Mora has a simple plastic sheath which has a “ribbed” form with vents and the knife is visible through them. The knife is secured by a plastic stopper that holds the knife in place. The housing is fully functional only when inserting one must be careful that the knife holstered properly. Rapala filleting knife’s sheath appearance is better and it conceals the knife more. It has a classic leather belt strap and an inner plastic insert which forms the shape of the housing and the housing protects itself from being cut. As a further advantage of the plastic liner is that when inserting the wet knives can be excess water after the work easily pour and housing will not rot.


The handle of both blades is made of plastic material, the Rapala model also features a guard of hard plastic. Handle of the Mora knife is shaped and made of the same material as the Army Mora Companion. It’s only a small piece of shorter, but no problem fits into a larger hand. Plastic handle on Mora is soft and very comfortable in the hand. Even in the winter is not cold and the grip in the hand is really sure. In contrast, Rapala knife has a plastic handle which is much harder and at the point of contact with the palm there are indentations that prevent rolling off the knife and accidentally moving the hands at work. As an additional safety feature a silver plastic guard is used that will reduce the possibility of injury to a minimum.

Perfect cutting power

The blade of the Mora and Rapala knives gradually taper towards the tip. Rapala has a transition to tip which less steep than Mora. This is shown mostly in the flexibility of the tip, where the Mora is a little narrower. My subjective feeling, however, was very good with both blades. Regarding cuttability, it’s totally excellent. I was very pleasantly surprised by the penetration of cut meat and filleting themselves. Rapala knife facet is slightly higher than with Mora, but at work I felt no difference. As I stated in the beginning, both blades are made of stainless steel, but a better feel of holding the blade I had with the Mora knife.


Overall, both knives evaluate very positively. When filleting is really a difference of five centimeters in length blade compared to traditional ten-centimeter blade to know. The biggest difference I saw was in the handset and narrowing towards the tip of the blade. Cutting power to both fillet knives compete very well.

Why Should You Think About Getting Solar Pond Pump?

Nowadays solar powered pond pumps are getting popular as more people turn to solar energy as an alternative source of power. With the increasing prices of gasoline and electricity, the use of solar heat is seen as an effective way to cut down on power bills and also keep the environment green.

In areas where there are no electricity lines and gasoline stations are scarce in between, the alternative resource of wind and heat from the sun has been in use for more than a century. Big, sleek and more modern windmills are being used today. These are difficult to install and are very expensive unlike solar panels that are easy to install and maintain. Thus solar power is considered the better choice.

Uses Of Solar Powered Water Pumps

Solar powered water pumps are mostly used in farms and agricultural communities. Today you can also see these pumps being used in households in the city: to heat up water for domestic uses in the household; move water in garden ponds, fountains and waterfalls, and so forth.

Solar powered water pumps is ideal for areas that receive a lot of heat from the sun. But it can still be used in areas where there is sunlight for at least three to four hours a day. The solution is to install batteries that store energy to be used during overcast days.

Types Of Solar Powered Water Pumps

There are a lot of solar powered water pumps available. The small ones are good for use in the garden: like in ponds, waterfalls and fountains. Just like those powered by electricity or gasoline, these water pumps are gauged according to lift and flow rates. The height or lift is the measure by which the pumps would have to carry the water upward while flow rates are the measure by which water is expelled from the pump. The higher the water flow, the faster the water will move. The strength and measure of the pump needed for your pond is determined by the amount of water in the pond (measured in gallons).

Solar powered water pumps nowadays are not as expensive as when they were first introduced into the market. Today there are complete kits for solar powered water pumps at very affordable prices. This kit comes complete with a pump, an interconnecting electric cable and a small solar panel. If the pump is to run for prolonged periods it is best to attach a battery that would act as a storage device. A charge controller is also needed to monitor the amount of energy stored.

Solar Powered Water Pumps Are Environmentally Friendly

Aside from being cost effective, these solar powered water pumps are environmentally friendly. Such alternative energy resource produces no pollution. Unlike petrol water pumps, there is no burning or combustion to obtain the energy in solar powered water pumps. It does not need to use gasoline thus it decreases the need to mine fossil fuels. It advocates the preservation of natural resources for future generations.

This accounts for the increase in demand and sales of these types of pumps. People are now aware of the impact of the use of alternative sources of energy to the environment. Many are shifting to solar powered water pumps because they are economical, easy to install and are environmentally friendly. More about various pond pumps can be read here –

Posted in DIY

Are RV Pumps Really That Noisy?

One of the biggest complaints that RV owners have is how noisy RV water pumps are. When it comes to noisy RV water pumps you can experience banging pipes, floor vibrations, water hammer, or even all three, which is more than enough to keep you awake all night. One of the leading causes to noisy RV water pumps is that the manufacturers used a cheap water pump so that they could keep costs down. If a noisy pump is keeping you awake at night, the good news is you can make your water pump quiet by following a few simple steps.

Easy Steps To Reduce RV Water Pumps Noise

  • Step One – You are going to need to find your water pump before you can start making any changes to it. The most common places that RV water pumps are located are under the dinette or in a cabinet by the sink. If you can’t locate it you will need to turn on one of your faucets to follow the noise. Once you have found the pump make sure that it is turned off so you can begin working on it safely.
  • Step Two – Most RV water pumps are held in place by 4 screws. Now place a rubber computer mouse pad underneath your water pump and reattach the screws. This helps to reduce the vibrations put out by the water pump.
  • Step Three – You will need to turn back on the water pump so that you can find the pipes that are rattling every time the pump is working. This part is better done with a friend because they can turn the faucets on and off while you locate the rattling noise. In most cases, you will find the noise coming from a cabinet wall where the cold water runs through the wall.
  • Step Four – Using 1/2 inch foam pipe insulation you will want to wrap each pipe that is making noise. Even though the insulation should fit snuggly over the pipe you might want to secure it at each end with some duct tape.
  • Step Five – Many RV water pumps also fall victim to rapid cycling, which means they turn on and off within 2 seconds when you are using a low flow of water. Before addressing this issue you will need to check to see if your pump is a victim of rapid cycling. To do this, turn a faucet on very low and check the pump. The pump should cycle, but the off time should be more than 2 seconds. If it is less than 2 seconds you want to increase the setting. Do not increase the setting by more than 1 clockwise turn.

Replacement Of RV Water Pumps With Variable Speed Pumps As An Option

If the above steps do not help quiet down those noisy RV water pumps, your other option is to replace the current one with a variable speed pump. This option is going to be a bit more expensive, but the amount of noise that it is able to reduce can make it worth it in the end. Installing an accumulator can also help reduce noise, and also extend the life of your pump. If you are looking for a reliable RV water pump, you may want to consider the popular Shurflo water pump.

Posted in DIY